Strumento di monitoraggio polvere a diffrazione ottica certificato QAL1
QAL 360
Strumento di monitoraggio polvere certificato QAL1 da TUV e MCERTs utilizzabile da solo o opzionalmente in network con altri strumenti per una misurazione di alta precisione della concentrazione di polvere da processi industriali.
Avendo una scala certificata 0–7.5 mg/m3, il QAL 360 può essere usato con livelli di concentrazione sia bassi che alti soddisfando i requisiti per monitorare i limiti di emissione di 5 mg/m3 stabiliti dalla direttiva sulle emissioni industriali per i grandi impianti a combustione 2010/75/UE.
Certificato a 7,5 mg/m3
- Features & Benefits
- Main applications
- Technical specifications
- Technical data
- approvals & certifications
- Downloads
- ProScatter™ Backscatter sensor technology with superior minimum detection <1 mg/m3
- Certified to 7.5 mg/m3
- Zero and Span (reference) checks available to ensure optimal instrument performance and compliant with QAL1
- Automatic Contamination Check – fully interrogates the optical system
- Purge Flow Fail Sensor option with inbuilt automatic optical shield activation
- Flue Gas Blocker to protect Plant Engineers from harmful flue gases during maintenance
- Stacks after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
- Non-condensing / dry flue gases
- Typical Applications:
- Incineration
- Metals (eg Steel/Aluminium)
- Minerals (eg Cement/Gypsum)
- Chemicals (eg TiO2 / Coating Powder)
- Power Generation Plant (eg Coal/Biomass)
| Technical Specifications | |
|---|---|
| Measured parameters | Dust |
| Technology | ProScatter™ Backscatter |
| Measurement / Monitoring capability | <0 – 500 mg/m3* |
| Stack / Duct diameter suitability | up to 10m |
| Flue gas temperature | up to 400°C |
| Baghouse | YES |
| Cartridge Filter | YES |
| Ceramic Filter | / |
| Coalescent Filter | / |
| Cyclone | YES |
| Electrostatic Precipitator (ESP) | YES |
| Wet Electrostatic Precipitator (WESP) | / |
| Wet Scrubber | / |
| Sensor variants | Stainless Steel Hastelloy® corrosion resistant |
| QA checks | YES |
*Application dependant
| Technical data | |
|---|---|
| Measurement capability | <0 – 500 mg/m3 |
| Stack Temperature Ranges | -20°C-250°C, up to 400°C option |
| Functionality and QA Checks | Functionality and QA Checks |
| Contamination Check | Automatic |
| Flue Gas Blocker | YES |
| Networked system | Option |
| Enclosure Protection Rating | IP65 |
- The measurement system was tested by TÜV Rheinland Energy GmbH in accordance with the European Standards EN 15267 Part 1, 2 and 3 and is QAL1 certified according to EN 14181
- MCERTs certified
